≥99% purity targetHPLC + mass spec testedCOA with every batchCold-packed shippingResearch use only
← Blog

How to read a peptide certificate of analysis (COA)

· Lab Team

Certificate of analysis illustration with a peptide vial

A certificate of analysis (COA) is the lab report that travels with a specific production lot. It is the only document that tells you what is actually in the vial you are holding, so it is worth knowing how to read one properly.

1. Check it matches your vial

Every COA should name the compound, the lot or batch number, the test date and the lab that ran the tests. The lot number on the COA must match the lot number on your vial label. A generic COA with no lot number, or one that is several years old, tells you nothing about your material.

2. Purity (HPLC)

Purity is usually measured by high-performance liquid chromatography (HPLC). The result is reported as a percentage: the share of the total UV signal that belongs to the main peptide peak. A result such as 99.2% means the remaining 0.8% of the signal comes from related impurities, such as truncated or deletion sequences left over from synthesis.

Look for the chromatogram itself, not just the number. A single sharp main peak with small, well-separated side peaks is what you want to see.

3. Identity (mass spectrometry)

HPLC tells you how pure a sample is, but not what it is. Identity is confirmed by mass spectrometry (MS), which measures the molecular weight of the main component. The COA should show the expected mass (calculated from the sequence) next to the observed mass. They should agree within the instrument's stated tolerance.

4. Net peptide content

A lyophilised powder is not 100% peptide. It also contains water and counter-ions (often trifluoroacetate, TFA, left from purification). Net peptide content, measured by amino acid analysis or nitrogen content, tells you how much of the powder weight is the peptide itself. It is commonly in the 70–90% range, and it is a different figure from HPLC purity.

5. Other tests you may see

  • Appearance: usually a white to off-white lyophilised powder or cake.
  • Endotoxin: bacterial endotoxin levels, measured by the LAL assay and reported in EU/mg. This matters for cell-culture work.
  • Water content: measured by Karl Fischer titration.

Red flags

  • No lot number, or a lot number that doesn't match your label.
  • A purity figure with no chromatogram.
  • Identity "confirmed" with no observed mass shown.
  • No lab name, or results the lab can't confirm when you ask.

Every order from our shop ships with the COA for its own lot. If anything on it is unclear, contact us and we'll walk you through it.

Third-party testedHPLC and mass spec on every lot
COA includedCertificate for your exact batch
Cold-packed shippingShips in 1–2 business days
Secure checkoutYour details are protected